Fujitsu AIRSTAGE UTY-ASGX Manual page 35

4-3-2 Room∙temperature∙display∙setting
Sets the display method of the room temperature to be displayed by the Web application.
Room temperature selection item
When you want to display the room temperature detected by sensor unchanged, select
"actual". When you want to display the room temperature corrected (used in control) by
the unit, select "adjusted".
Note After changing the display settings, the changes will take effect only from the
Web application newly started from the Menu screen.
In order for the changes to take effect, re-display the Web application from the
Menu Screen (Refer to "(-2 Menu").
For S series, only thermistor value (actual) is displayed.
Copyright© 2009-2016 Fujitsu General Limited. All rights reserved.
33