Toshiba AW-G9930S Service Manual page 34

Parts
10) Remove the motor according to the steps 3)
(14) Tub
to 7) of (8) Motor.
11) Remove the drive assembly according to the
steps 1) to 10) of (12) Drive assembly.
12) Remove the capacitor by removing two
mounting screws (ϕ 5 tapping screw).
13) Remove 8 screws (size 10 mm) for the
motor base and remove the motor base from
the tub. (Photo. 29)
* Follow the reverse order of removal.
Note 1 : Assemble securely to prevent air or
Note 2 : After completing replacement of the
x Before starting washing, open the faucet and check that the water supply hose
joint is not loose and no water leaks.
The loose screw or hose joint may cause water leakage resulting in an unexpected damage.
WATER LEAKAGE
All manuals and user guides at all-guides.com
Procedure ( : Notes)
water leakage from the opening of the
air tube and the drain hose.
mechanism, be sure to fill the water in
the tub and confirm no water leakage.
CAUTION
– 33 –
Illustrations
(Photo. 29)