Toshiba AW-G9930S Service Manual page 24

When reassembling, perform the disassembling procedures in reverse order unless otherwise specified.
Parts
(1) Program
*
timer
*
<Caution on repairing and replacement>
1) Open the lid and remove 2 caps on the
2) Slide the control panel to the right and lift up
3) Remove 6 connectors of the lead wire unit.
4) Remove 2 program timer mounting screws.
*
Note 1 : Match each lead color.
Note 2 : Take care that timer lead wires are not
Note 3 : Take care the lead wires are not jammed
x Unplug the power cord for the work unnecessary to power on like disassembling.
UNPLUG POWER
All manuals and user guides at all-guides.com
8-2. DISASSEMBLY INSTRUCTIONS
Procedure (
The program timer is susceptible to static
electricity and may be damaged. So, always
discharge the electricity before repairing.
Put on gloves when making inspection and
disassembling.
Refer to page 11
Perform in the same way when replacing
electrical parts.
control panel with a screwdriver (-), etc..
Then remove 2 screws under the caps.
(Photo. 1)
it the right end with both hands. Remove it
from the top cover. (Photo. 2)
(Photo. 3)
Then remove the program timer from the
control panel. (Photo. 4)
When assembling, following notes are
necessary for arranging the lead wires.
pinched by other parts, causing
misoperation of their switches.
between the top cover and the control
panel.
WARNING
Do not hold the plug by a wet hand.
Failing to unplug may cause an electric shock.
: Notes)
– 23 –
Illustrations
(Photo. 1)
(Photo. 2)
(Photo. 3)
(Photo. 4)