Table of Contents
Advertisement
CAUTION ON REPAIRING AND/OR DISASSEMBLING
When checking trouble or repairing, keep to the following items.
(1) Unplug the power cord and wait for 5 seconds before starting the operation (the capacitor of large
capacity is used).
(2) The static electricity charged on plastic parts of the machine or on the human body may cause damage to
the electronic parts. Wear a ground ring or touch the two short plug pins together and the ground wire or
ground pin once to discharge the electric potential difference between the human body and the washing
machine when repairing the program timer
(3) As program timer is covered by moistureproof coating, parts in the electronic timer can not be replaced.
Please change the whole unit of the program timer. Also, do not damage the moistureproof coating.
(4) As live high (see as below) and low (DC17 V) voltage are mixed inside the panel plate, pay attention not
to touch the parts.
AW-9500SER / SB / SBK
AW-9500SBB / SBJ / SBX
AW-G9930S / G1130S
(5) The radiator plate of the program timer is hot immediately after the operation. Take care not to suffer
burns.
All manuals and user guides at all-guides.com
– 11 –
Ground pin
Power plug
AC 230 - 240 V
AC 220 V
AC 110 V
Advertisement
Table of Contents
