Table of Contents
Advertisement
Storage
Storage Safety
•
Shut off the machine, remove the key, and wait
for all movement to stop before you leave the
operator's position. Allow the machine to cool
before adjusting, servicing, cleaning, or storing it.
•
Do not store the machine or fuel container where
there is an open flame, spark, or pilot light, such
as on a water heater or other appliance.
Storing the Machine
1.
Park the machine on a level surface, engage the
parking brake, shut off the machine, and remove
the key.
2.
Clean dirt and grime from the entire machine,
including the outside of the motor housing.
Important:
You can wash the machine
with mild detergent and water. Do not use
high-pressure water to wash the machine.
Pressure-washing may damage the electrical
system or wash away necessary grease at
friction points. Avoid excessive use of water,
especially near the control panel, lights,
motor, and battery.
3.
Inspect the brakes; refer to
Brakes (page
44).
4.
Check the tire pressure; refer to
Tire Pressure (page
5.
Check and tighten all bolts, nuts, and screws.
Repair or replace any part that is damaged.
6.
Paint all scratched or bare metal surfaces.
Note:
Paint is available from your authorized
Toro distributor.
7.
Cover the machine to protect it and keep it clean.
Inspecting the
Checking the
16).
47
Advertisement
Table of Contents
