Toro 07413LT Operator's Manual page 34

Figure 36
1. Flange-head bolts (3/8 x
3/4 inch)
2. Spindle
4. Remove the dust cap from the hub
Figure 37
1. Cotter pin
2. Spindle
3. Tab washer
5. Remove the cotter pin and nut retainer from the
spindle and spindle nut
6. Remove the spindle nut from the spindle, and
separate the hub and rotor assembly from the
spindle (Figure 37
3. Caliper bracket (brake
assembly)
(Figure
4. Spindle nut
5. Nut retainer
6. Dust cap
(Figure 37).
and Figure 38).
1. Spindle
7. Wipe clean the spindle with a rag.
8. Repeat steps
g321363
the other side of the machine.
37).
g192346
34
Figure 38
2. Hub and rotor assembly
1 through 7 to the hub and rotor at
g192347