Optional Blade Spacing - Toro Verticutter Reelmaster 5010 Series Operator's Manual

Optional Blade Spacing

0.50-Inch Blade Spacing for Model 03618
To change the configuration of the verticutter from the standard 0.75-inch spacing to the 0.50-inch spacing
requires an additional 34 spacers, Part No. 17-1580 and an additional 10 carbide blades, Part No. 106-6355,
or an additional 10 regular blades and Part No. 17-1590
1. 0.75-inch blade spacing (default)
1.00-Inch Blade Spacing for Model 03619
To change the configuration of the verticutter from the standard 1.25-inch spacing to the 1.00-inch spacing
requires 19 new spacers, Part No. 140-5532 and an additional 4 carbide blades, Part No. 106-8625, or an
additional 4 regular blades and Part No. 93-3038-03
1. 1.25-inch blade spacing (default)
(Figure 17).
Figure 17
2. 0.50-inch blade spacing
(Figure 18).
Figure 18
2. 1.00-inch blade spacing
15
g345670
g345671