Related Manuals for Toro ROPS Reelmaster 5210
Summary of Contents for Toro ROPS Reelmaster 5210
- Page 3 TABLE OF CONTENTS INTRODUCTION – TO THE PURCHASER PACKING LIST/PARTS PHOTOS DECALS MOUNTING INSTRUCTIONS...
- Page 4 Failure to do so could result in serious personal injury or canopy damage. If you have any questions, consult your dealer. To assist your TORO distributor/dealer in handling your needs, please record hereafter the model number and serial number of your canopy and tractor. It is also advisable to supply them to your insurance company.
- Page 5 PACKING LIST Description Bolt, Carriage, M12x40x1.75, Gr. 8.8, YD Nut, Flange, Nylon-Locking, M12x1.75, Gr. 8.8, YD Bolt, Hex, 3/8" x 1 1/2", Gr. 8, YD Nut, Hex, 3/8", Gr. 8, YD Front Brackets L&R Rear Mounting Bracket Mesh Package Only Nut, Flange, 5/16”, YD Rear Clamshell Brackets for Door L&R...
- Page 6 *NOTE – Parts photos are not to scale.
- Page 7 Mount them in a readable location at, or near, their original location before operating the tractor. 3. New cab decals and tractor decals are available from your Toro distributor/dealer. CAUTION The resulting noise levels when...
- Page 8 MOUNTING INSTRUCTIONS Step 1. Take the front left under platform support bracket and position under the platform. Fasten into place with two 3/8” x 1 ½” hex bolts and nuts into the side of the operator platform. _________________________________________________________ Step 2. Repeat for the right under platform bracket support bracket.
- Page 9 Torque Specifications: M12 torque: 102 ft-lbs 3/8” torque: 48 ft-lbs...