Toro Z Master 8000 Series Operator's Manual page 37

Figure 39
4. Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the full mark on the
dipstick (Figure 38).
5. Start the engine and drive to a flat area. Check
the oil level again
6. If needed, add oil to the full mark on the dipstick.
(Figure 38).
Changing the Engine-Oil Filter
Service Interval: Every 200 hours
Note:
Change the engine oil filter more frequently
when operating conditions are extremely dusty or
sandy.
1. Drain the oil from the engine; refer to
the Engine Oil (page
2. Change the engine oil filter
Note:
Allow 2 minutes for the new oil to be
absorbed by the new filter material.
g032754
Note:
Ensure the oil filter gasket touches the
engine and then an extra 3/4 turn is completed.
3. Fill the crankcase with the proper type of new
oil; refer to
37
36).
(Figure
Figure 40
Changing the Engine Oil (page
Changing
40).
g032755
36).