4. Troubleshooting
34) Polaris Color - Removing debris from the Developer Unit.
•
Symptom :
Line occurs on the paper moving direction.
•
Cause :
Debris on developer unit causes line on print
•
Troubleshooting
1) Remove the developer unit.
(Refer to 3.2.2.2. Developer Unit)
2) Disassemble the developer unit cover (pay attention not to destroy lock) Empty developer out on clean paper.
3) Remove lumps with the Jig from mag roller.
4) Pay attention & clean the circled area where oil can cause build-up in the Fuser.
4-263
Copyright© 1995-2016 SAMSUNG. All rights reserved.