Samsung MULTIXPRESS CLX-9251 Series Service Manual page 311

A3 color copier

Hide thumbs Also See for MULTIXPRESS CLX-9251 Series:

Table of Contents

► Error Code

► Error message

Tray 4 cassette is pulled out. Insert it properly.

Tray 4 is pulled out or the auto size sensor connector is not connected or is broken.

► Troubleshooting method

1) Remove and insert tray4 correctly.

2) If the problem persists, remove tray3 and tray4. Look inside machine.

3) Check if the auto size sensor cable is connected correctly. Unplug and reconnect it.

4) If the connection is OK, replace the auto size sensor(JC93-00018A).

5) If the problem persists, replace the DCF board(JC92-02453A).

(Refer to 3.3.33.1. DCF Main Board)

4. Troubleshooting

Troubleshooting