Samsung MULTIXPRESS CLX-9251 Series Service Manual page 313

A3 color copier

Hide thumbs Also See for MULTIXPRESS CLX-9251 Series:

Table of Contents

► Error Code

► Error message

Input System Failure #H1-1453 : Pull Tray 4 out and insert it.

The paper is not fed from tray4.

► Troubleshooting method

1) Remove and insert tray4 correctly.

2) Turn the machine off then on.

3) If the problem persists, turn the machine off.

4) Remove the Bracket Rear Cover after removing 6 screws.

5) Check if the connection between the DCF pick up drive and DCF board is correct.

6) If the connection is OK, replace the pick up drive unit(JC93-00442A).

(Refer to 3.3.33.3. DCF Pick Up Motor)

7) If the problem persists, check the following.

a) Remove the DCF pick up unit2.

b) Check if the photo sensor in the DCF pick up unit2 is contaminated. If so, clean it.

c) If the photo sensor(0604-001393) is defective, replace it.

4. Troubleshooting

Troubleshooting