4. Troubleshooting
4.4.5.6. Image Management
Auto Color Registration
•
Diagnostics > Color Management > Auto Color Registration
Purpose
Operation Procedure
Verification
Specification
Reference
Manual Color Registration
•
Diagnostics > Image Management > Manual Color Registration
Purpose
Operation Procedure
4-39
To correct color registration of the system when it shows color shift between the original and a copy.
1) Select "On" or "Off" for ACR execution.
•
If you select "Off", ACR will not execute.
•
If you select "On", ACR will execute as the determined conditions.
•
If you select "Execute Now", ACR will execute right now.
2) Change execution condition(s) of the Automatic Color Registration.
•
Page Condition : The system executes ACR based on the count of printed pages since
the last ACR execution.
•
LSU Temperature : The system executes ACR when LSU temperature of the device
increases or decreases by the configured value since the last ACR execution.
NOTE
•
ACR execution occurs when one of the ACR option meets the condition.
Compare the original with a copy after an execution of Auto Color Registration.
Page Condiion
•
Range : 200 ~ 5000
•
Default : 500
•
LSU Temperautre
•
Range : 1 ~ 100
•
•
Default : 3
Refer to 4.6.8. Incorrect color registration
To correct color registration of the system manually when it shows color shift between the original
and a copy.
Adjust the offset value for each color.
X offset of Y in Left
•
X offset of M in Left
•
•
X offset of C in Left
•
X offset of Y in Right
•
X offset of M in Right
X offset of C in Right
•
Y offset of Y in Center
•
Y offset of M in Center
•
Y offset of C in Center
•
Copyright© 1995-2016 SAMSUNG. All rights reserved.