Toro Groundsmaster 3200 Series Installation Instructions page 2

2. Align the sign mount to the hood in the same
location as plastic rivets removed in step
(Figure 2).
3. Install the sign mount using 4 flange-head bolts
(1/4 x 3/4 inch) on top of the hood, and 2 bottom
mounts and 4 locknuts (1/4 inch) on the bottom
of the hood (Figure
Figure 2
1. Flange-head bolts (1/4 x
3/4 inch)
2. Sign mount
2).
3. Bottom mount
4. Locknut (1/4 inch)
4. Install the slow-moving vehicle sign as shown
1 in Figure
g307919
1. Flange-head bolts (1/4 x
3/4 inch)
2. Slow-moving vehicle sign
2
3.
Figure 3
3. Locknut (1/4 inch)
g307963