Table of Contents
Advertisement
The following steps show the installation of CMA connector and the cable basket on the rear right side of the
chassis. The rear left side of the chassis shares the identical parts with the right side. However, the installation
orientation is upside down comparing to the right side.
Figure 2-16: CMA connector and basket locations
Install the two CMA connector brackets to the chassis:
1)
Insert CMA connecter key holes onto key pins.
2)
Push CMA connector up till it clicks in place.
3)
Lock in place with screw.
Install the two cable baskets to the chassis:
1)
Clip cable basket to chassis bracket.
2)
Click into place.
Pictures below demonstrate the steps to install CMA on the rear of the chassis.
30
Advertisement
Table of Contents
Troubleshooting
