1)
Loosen thumb screws (
of the chassis to pull out chassis.
2)
Remove cables.
3)
Remove CMA.
4)
Pull the chassis out of the rack until you hear a click.
5)
Remove drives from the chassis.
6)
Pull the white release tabs on both sides of the chassis forward, with tabs pulled forward pull the chassis
forward to remove from the outer rails.
Figure 2-13: Pull Chassis from Rack
Caution: When removing the chassis, multiple engineers are required to remove it by hand, or lift equipment is
recommended when available to ensure safety.
of Figure 2-12) and/or shipping screws (
of Figure 2-12) on left and right sides
26