Fujitsu AIRSTAGE J-II Design & Technical Manual page 426

Hide thumbs Also See for AIRSTAGE J-II:

Table of Contents

Filter mode setting

Set the Filter mode to suppress an increase of the amount of communication information in the VR-II system.

Filter mode is turned on by inserting the accessory connecting wire at the CN4 connector on the PC board.

When the Filter mode setting is changed, turn the power off once. Otherwise, the setting will not be recognized.

For dust proof

Ø22.2 For conduit

Connecting wire (Accessory)

272 Hole pitch

- (05 - 122) -

For dust proof bushing

For M4×20-mm

Chapters

Table of Contents