Wireless Remote Controller - Fujitsu AIRSTAGE J-II Design & Technical Manual

2-11.

WIRELESS REMOTE CONTROLLER

MODEL : UTY - LNH
„ „
FEATURES
„ „
Built-in timers
z „
Select from four different timer programs (ON / OFF / PROGRAM / SLEEP).
Program timer
z „
The program timer operates the on and off timer once within a 24-hour period.
Sleep timer
z „
The sleep timer function automatically corrects the temperature thermostat setting according to the
time setting to prevent excessive cooling and heating while sleeping.
Cooling operation / dry operation
When the sleep timer is set, the set temperature
automatically rises 1 °C every hour. The set
temperature can rise up to a maximum of 2 °C.
60min.
Easy installation and operation
z „
Mixed-up
• Custom code is used for controlling
right indoor unit. (Up to 4 codes can
be set.)
NOTE: Timer setting from a wireless remote controller becomes invalid, if the indoor unit is connected
with a wired or a simple remote controller.

● 4 mode timer setup available (ON / OFF / PROGRAM / SLEEP).
● Up to 16 indoor units connected within the remote controller group
can be simultaneously controlled.
● Can be used jointly with wired remote controllers.
● Easy to change custom code (max. 4 units).
Timer setting
2 °C
1 °C
After code change
A B C D
A B C D
• Wide and precise
transmitting range.
- (05 - 84) -
Heating operation
When the sleep timer is set, the set temperature
automatically drops 1 °C every 30 minutes. The set
temperature can drop to a maximum of 4 °C.
1 °C
2 °C
30min.
60min.
90min.
Timer setting
System addressing
z „
• During installation work, system addressing can
be performed using the wireless remote controller,
thus eliminating manual switch setting.
Transmission line
Indoor unit
3 °C
4 °C
Wireless
remote controller