2-14.
REMOTE SENSOR UNIT
MODEL : UTY-XSZX
FEATURES
New amenity space can be offered by installing the Remote sensor.
ELECTRICAL WIRING
●
Remove the screws from the remote sensor, and remove the cover.
●
Connect the cable to the remote sensor as shown below.
●
Ensure that the wires do not contact each other.
Remote sensor
INSTALLATION
When the cable is attached to the wall
z
●
Remove the material covering the wiring penetration (thin material) in the cover of the sensor
unit with a pair of cutters. The cable passes through this hole.
●
Now attach the remote sensor on the wall using the screws.
Screw (big)
To indoor unit
Cable
Mounting hole dimensions
- (05 - 93) -
40
Unit : mm