Advertisement
D. Note for toner hopper drive gear (31T) and stirring
shaft attachment
•
Be careful of the stirring shafts A and B attachment positions.
Stirring shaft B
Attach so that the angle between stirring shaft A and B is 90
degrees.
•
When attaching the toner hopper drive gear (31T), be careful of
the E-ring stop position as shown below. (If the E ring is on the
milled surface, it is apt to disengage.)
31T gear
90
Stirring shaft B
6 – 21
8.Operation panel/intermediate cabinet
1
Open the front cabinet.
2
A
Remove two screws
, two screws
nected to the operation panel unit.
2
Remove the operation panel unit.
3
Remove the process cover unit, remove six screws
connectors, and remove the intermediate cabinet.
B
A
9. Frame major parts
9-1. Cooling fan motor replacement
A. Cooling fan motor removal
1
Remove the original cover, the original guide, the upper cabinet
left, and the upper cabinet right.
B
, and two harnesses con-
C
and two
A
C
C
Advertisement
