Advertisement
6. User simulation
This simulation allows to change and set the following setting which has been set when shipping from the factory.
(1) Functions which can be set and canceled by the user simulation
Function name
•
After completion of copying, when a certain time is passed, the machine returns to the initial state
Auto clear
automatically. The time to return to the initial state is set in the range of 30 - 120 sec in increment of
30 sec. This function can be cleared.
•
When the copier is left without copying with the power ON, the power consumption is automatically
lowered to 60Wh. The time to start this function is set in the range of 1 min - 120 min.
•
When this function operates, the pre-heat lamp on the operation panel is lighted.
Pre-heat
To return to the initial state:
Press any key on the operation panel. (If the COPY button is pressed, the machine returns to the
initial state and performs copying.)
If also the original is set or the tray is pulled out, the machine returns to the initial state.
•
When the copier is left without copying with the power ON, the power consumption is automatically
lowered to 10Wh. The time to start this function is set in the range of 5 min - 120 min.
•
When this function operates, al the lamps on the operation panel except for the pre-heat lamp are
Auto power shut off
turned off.
•
This function learns the use conditions of the copier to automatically control the time to start the
pre-heat function and the auto power shut off function to the optimum level. This function can be
Auto pre-heat control
activated or inactivated.
•
When this function is activated, the time settings in the pre-heat function and the auto power shut off
function are ignored.
•
When the copier is left without copying for a certain period, this function is used to enable or disable
Auto shut OFF
the function of lowering the power consumption.
•
By use of the auto document feeder (option), originals of different sizes are fed manually.
Auto document
feeding unit manual
•
When this function is activated, set an original during the original feed lamp blinks after completion of
document feed mode
copying of the previous original, and the original is fed automatically.
•
When the sorter (option) is installed, the interval between bins can be extended to facilitate to take
Sorter take-out mode
out the copy by pressing the copy take-out key.
* Note: The value of power consumption in pre-heat or in auto power shut off may vary according to the use conditions.
(2) User simulation
Simulation procedure
1. Press the tray selection
key for 5 sec or more.
2. Enter the simulation code
No. with the10-key pad.
3. Press the COPY button.
4. Enter the selection code
No. with the 10-key pad.
5. Press the COPY button.
6. Press the tray selection
key.
* Press the clear key.
Function and setting content
To return to the initial state:
Press the COPY button. The machine returns to the initial state.
State
User simulation input is allowed.
Selection of simulation code No.
Determination of simulation code
Selection of simulation code menu
Determination of simulation code menu
Escape from user simulation.
•
When this key is pressed during selection of user
simulation, the mode returns to 1 (User simulation is
allowed.).
(Use this key in case of erroneous input)
•
After setting the program, when this key is pressed, the
next program input is allowed.
Paper jam/Maintenance/
Mini maintenance/
Paper supply/Toner supply/
Warning LED
8 – 16
Factory setting
60 sec
15 min
30 min
Set
Cancel
Cancel
Set
Copy
quantity
display
Blink
Blink
1
Blink
1
1
Blink
1
2
1
2
Blink
Returns to
the copy
OFF
quantity
display.
Blink
(
Copy
button
LED
OFF
ON
ON
ON
OFF
—
OFF
: Blink)
Advertisement
