Advertisement
2. Procedures
1
Manually move the lens carriage unit to fit the lens carriage hole
with the optical unit frame hole (which is not the home position
hole but the reduction side hole). Insert a pin into the holes, fix the
lens unit, and stretch the wire.
2
Under the above state, fit the zooming cam drive gear hole with
the No. 4/5 drive unit base hole A (by inserting a pin, etc.), and
insert the zooming can drive gear into the shaft.
Zooming cam drive gear
Shaft
3
Remove the pin which fixes the lens unit and the zooming cam.
Lens carriage unit
Hole
Hole A
Hole B
4
Manually turn the zooming can drive gear to fit the zooming cam
drive gear hole and No. 4/5 mirror drive unit base hole B.
5
Install No. 4/5 mirror drive shaft unit and the rack.
* When installing the rack, be sure to fit No. 4/5 mirror unit projection
with No. 4/5 mirror drive shaft unit hole.
6 – 14
Pin
Hole Zooming cam
drive gear
No. 4/5 mirror
drive unit base
Hole B
Zooming cam drive gear
Advertisement
