Table of Contents
Advertisement
11. Remove the five screws that secure the system board, and then carefully lift the system board out of
the chassis.
Note: Carefully handle the system board by its edges.
Figure 83. Removing the five screws that secure the system board
12. Pinch the two tabs of each of the two pins on the internal speaker holder as shown. Then, lift the
internal speaker holder to remove it from the failing system board.
Figure 84. Removing the internal speaker holder
13. Insert the two pins on the internal speaker holder into the corresponding holes in the new system
board until it snaps into position.
.
Chapter 9
Installing or replacing hardware
139
Advertisement
Table of Contents
