Table of Contents
Advertisement
7. Position the antenna bracket over the computer so that the hole in the bracket with the corresponding
standoff on the system board.
Figure 81. Installing the antenna bracket
8. Pivot the bottom of the antenna bracket toward the rear of the computer, to insert the standoff on the
system board into the slot in the bracket. Then, pivot the top of the antenna bracket to close it.
Figure 82. Pivoting and closing the antenna bracket
9. Install the plastic fastener to secure the top of the antenna bracket to the bottom of the bracket.
10. Install the front Wi-Fi antenna. See "Replacing the front Wi-Fi antenna" on page 130.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 140.
.
Chapter 9
Installing or replacing hardware
137
Advertisement
Table of Contents
