Table of Contents
Advertisement
5.
Torque the bolts to 179 to 228 N∙m (132 to 168
in-lb).
Brake Maintenance
Adjusting the Parking
Brake
1.
Ensure that the parking brake is disengaged.
2.
Using jack stands, lift the rear of the machine;
refer to
Lifting the Machine (page
3.
Using 2 wrenches, hold the adjusting post on the
caliper in place with 1 wrench, and loosen the
jam nut 1/4 turn with the other wrench
52).
1. Adjusting post
2. Jam nut
4.
While holding the adjusting post and the jam
nut in place, turn the adjusting post in to tighten
(Figure
52).
Note:
Perform this step until you feel drag on
the wheel.
5.
While holding the adjusting post and the jam nut
in place, back off 1/4 turn
6.
While holding the adjusting post and the jam nut
in place, tighten the jam nut
7.
Perform steps
45
29).
Figure 52
3. Caliper
(Figure
52).
(Figure
52).
1
through
6
to the other side.
(Figure
g034434
Advertisement
Table of Contents
