Table of Contents
Advertisement
Fuel System
Maintenance
Checking the Fuel Lines
and Connections
Service Interval: Every 500 hours/Yearly (whichever
comes first)
Check the fuel lines, fittings, and clamps for signs of
leaking, deterioration, damage, or loose connections.
Note:
Repair any damaged or leaking fuel system
component before using the machine.
Replacing the Fuel Filters
Service Interval: Every 400 hours/Yearly (whichever
comes first)
This machine is equipped with a 10 micron and 30
micron fuel filter
(Figure
Figure 33
Left rear tire removed for clarity.
1. Filter (30 micron)
1.
Park the machine on a level surface.
33).
2. Filter (10 micron)
2.
Engage the parking brake.
3.
Shut off the engine and remove the key.
4.
Disconnect the battery; refer to
the Battery (page
5.
Place a clean container under the fuel filter and
replace the fuel filter as shown in
Note:
Ensure that the flow-direction arrow on
the replacement filter points toward the engine.
Ensure that the 30-micron filter is the first in-line
filter (i.e., closer to the fuel tank). The 10-micron
filter should be the second in-line filter (i.e.,
closer to the engine).
6.
Connect the battery; refer to
Battery (page
g417907
36
Disconnecting
38).
Figure
Figure 34
Connecting the
39).
34.
g400217
Advertisement
Table of Contents
