Replacing the Headlight
Specification: See your Parts Catalog.
1.
Disconnect the battery; refer to
the Battery (page
2.
Remove the hood.
3.
Disconnect the wire-harness connector from the
headlight connector
Figure 41
1. Headlight
2. Screw
4.
Remove the screws that secure the headlight to
the hood.
Note:
Retain all parts for installation of the new
headlight.
5.
Remove the old headlight and use the screws to
secure the new headlight to the hood.
Torque the screws to 1 N∙m (9 in-lb).
6.
Connect the wire-harness connector to the
headlight connector
Disconnecting
38).
(Figure
41).
3. Wire-harness connector
(Figure
41).
Locating the Fuses
The fuses are located under the hood
1. Engine (10 A)
2. Main system B+ (10 A)
3. USB plug and beacon (10
g411791
A)
40
(Figure
Figure 42
4. Horn and headlights (20
A)
5. Optional 12V kit (10 A)
42).
g409721