Canon imagePASS-R1 Service Manual page 50

6. If you installed a new HDD, install system software (see
A spare HDD is shipped without preinstalled system software.
7. Make sure to configure the date and time in Setup (see
8. Before you leave the customer site, verify the imagePASS operation.
• Connect the imagePASS to the network (see
• Ask the site administrator to check the Setup options (see Configuration and Setup).
"Installing System Software" on page
"To configure the system date and time" on page
"imagePASS connector panel and LED diagnostic codest" on page
45
3. REPLACING PARTS
47).
25).
17).