Canon imagePASS-R1 Service Manual page 22

No.
17 Power supply
18 Power switch
19 Chassis
20 Power supply duct
■ imagePASS connector panel and LED diagnostic codest
The connector panel of the imagePASS has the external connectors and power switch. Familiarize yourself with the connector
panel of the imagePASS.
No.
1 Type A USB2.0 ports (x2)
2 Type A USB2.0 ports (x2)
3 Type A USB3.0 ports (x2)
4 Printer interface connector
5 Power connector
6 Network port (Upper RJ-45)
7 Crossover Ethernet connector
8 Duct
9 Power switch
During startup, the imagePASS advances through a standard diagnostic sequence. Each diagnostic code flashes rapidly on the
LED display during this sequence, until the imagePASS reaches Idle. At Idle, the LED display shows the 00 code.
NOTE:
The LED display is mounted in upside-down orientation.
Parts Name
1
2
3
4
5
Figure 5: imagePASS connector panel
Name
17
3. REPLACING PARTS
6
7
8
9