Huawei 01075345 User Manual page 60

SUN2000-(2KTL-6KTL)-L1
User Manual
● Since the output of the PV string connected to the SUN2000 cannot be
● During the installation of PV strings and the SUN2000, the positive or negative
Figure 5-13 DC input terminals
(1) Terminals of DC input 1
Procedure
Step 1 Assemble a DC connector.
Use the Staubli MC4 positive and negative metal terminals and DC connectors
delivered with the SUN2000. Using incompatible positive and negative metal
terminals and DC connectors may result in serious consequences. The caused
device damage is not covered under any warranty or service agreement.
Issue 10 (2023-02-13)
NO TICE
grounded, ensure that the PV module output is well insulated to ground.
terminals of PV strings may be short-circuited to ground if the power cable is
not properly installed or routed. In this case, an AC or DC short circuit may
occur and damage the SUN2000. The caused device damage is not covered
under any warranty or service agreement.
CA UTION
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connection
(2) Terminals of DC input 2
53