Optional) Installing A Smart Dongle - Huawei 01075345 User Manual

SUN2000-(2KTL-6KTL)-L1
User Manual
(A) Core wire
(D) Hydraulic pliers
Step 2 Connect the PE cable.
● Ensure that the PE cable is connected securely.
● You are advised to use the right ground point and reserve the other ground
Figure 5-3 Connecting a PE cable
----End

5.4 (Optional) Installing a Smart Dongle

Procedure
●
Issue 10 (2023-02-13)
NO TICE
point for future use.
NO TE
● You are advised to install the Smart Dongle before installing the WLAN antenna.
● If you prepared a Smart Dongle without a SIM card, you need to prepare a standard SIM
card (size: 25 mm x 15 mm) with the capacity greater than or equal to 64 KB.
● When installing the SIM card, determine its installation direction based on the silk
screen and arrow on the card slot.
● Press the SIM card in place to lock it, indicating that the SIM card is correctly installed.
● When removing the SIM card, push it inwards to eject it.
● When reinstalling the cover of the Smart Dongle, ensure that the buckles spring back in
place with a click sound.
4G Smart Dongle (4G Communication)
Copyright © Huawei Technologies Co., Ltd.
(B) Insulation layer
(E) Heat gun
5 Electrical Connection
(C) Heat shrink tubing
45