Huawei 01075345 User Manual page 34

SUN2000-(2KTL-6KTL)-L1
User Manual
Installation Environment Requirements
●
●
●
Mounting Structure Requirements
●
●
●
●
Installation Angle Requirements
The SUN2000 can be wall-mounted or pole-mounted. The installation angle
requirements are as follows:
●
●
Issue 10 (2023-02-13)
regions prone to sea breeze vary with weather conditions (such as typhoons
and monsoons) or terrains (such as dams and hills).
The SUN2000 must be installed in a well-ventilated environment to ensure
good heat dissipation.
When the SUN2000 is installed under direct sunlight, the power may be
derated due to the temperature rise.
You are advised to install the SUN2000 in a sheltered place or install an
awning over it.
The mounting structure where the SUN2000 is installed must be fire resistant.
Do not install the SUN2000 on flammable building materials.
Ensure that the installation surface is solid enough to bear the weight of the
SUN2000.
In residential areas, do not install the SUN2000 on plaster board walls or
walls made of similar materials with a weak sound insulation performance
because the noise generated by the SUN2000 may interfere with residents.
Install the SUN2000 vertically or at a maximum back tilt of 15 degrees to
facilitate heat dissipation.
Do not install the SUN2000 at forward tilted, excessive back tilted, side tilted,
horizontal, or upside down positions.
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
27