When writing to the SD card is finished, the "DDWIN" program can be closed and the SD
card removed from the PC and inserted into the RD55UP12-V module.
3.3 Prepare hardware
Unpack the selected iQ-R hardware, mount it to the base rack and connect it as instructed
(refer to Mitsubishi Electric hardware manuals). The control unit can now be switched on.
3.4 Set IP addresses for RD55UP12-V IBH
First, you have to create a project in GW-Works3 that matches the hardware you have
plugged in.
Under "Parameters" →"Module Information" →RD55UP12-V "→Basic Setting" →"Own node
setting" the IP addresses for the control and process level can then be set.
_________________________________________________________________________
Document: Quickstart_IoTGateway_EN
Mitsubishi Electric Europe B.V.
Rev: 001G
Date: 01/02/2022
9