Table of Contents
Advertisement
After stopping the trace, the recorded data is in a buffer inside the IoT Gateway.
The data can be downloaded to the connected PLC by pressing "Download trace"
Double clicking on the downloaded file starts Wireshark and shows the communication
running on the selected interface.
Since the evaluation of Wireshark-Trace requires some specialist knowledge, this
diagnosis should be carried out in the event of a malfunction using the IBHsoftec hotline.
_________________________________________________________________________
Document: Quickstart_IoTGateway_EN
Mitsubishi Electric Europe B.V.
Rev: 001G
Date: 01/02/2022
39
Advertisement
Table of Contents
