Table of Contents
Advertisement
On this page, click on "Browse" at "Select licence file" to search for the corresponding file
and then click on "Upload licence file" to copy it to the SD card.
After a restart of the system, the IoT Gateway can be used without restrictions.
The basic set-up of the IoT Gateway is now complete. The individual functions are explained
in the following chapters.
3.6 Backup / Restore of SD card
After all the necessary configurations have been made and the project functions have also
been parameterized, a backup copy can be created from the SD card using the "DDWIN"
software. This backup can only be used in the RD55UP12-V module with the hardware ID
for which the IoT Gateway license was created.
3.6.1 Create Backup
To create the backup, switch off the controller with the IoT Gateway and remove the SD card
from the IoT Gateway module. Insert the SD card into the PC and run the "DDWIN.EXE"
program as administrator.
1. Select the SD card in the PC under "Choose disk"
2. Select a drive path under "Choose file" and enter the desired file name
3. Select „>>Backup>>"
_________________________________________________________________________
Document: Quickstart_IoTGateway_EN
Rev: 001G
Date: 01/02/2022
Mitsubishi Electric Europe B.V.
12
Advertisement
Table of Contents
