Table of Contents
Advertisement
4.2.2 Insert robot via web interface
The station name (freely selectable) and the IP address of the robot with port number must
be entered manually. If the Ethernet connection is OK, the robot model and the number of
axes are entered automatically by pressing "Read type".
Then press "OK".
After a few seconds, the web interface will again show "OPC server running" in a green box.
_________________________________________________________________________
Document: Quickstart_IoTGateway_EN
Mitsubishi Electric Europe B.V.
Rev: 001G
Date: 01/02/2022
23
Advertisement
Table of Contents
