Table of Contents
Advertisement
Clicking the Properties button opens a dialogue box with the specification of the network
card via which the IoT Gateway is connected.
Click on the Add to list button to adopt the display name and the TeamViewer ID. Click
OK to close the dialogue box.
The installation of TeamViewer IoT in the IoT Gateway is hereby completed.
9.1.4 Connection setup
From any PC, a connection can be established via the Internet to the IoT Gateway and
thus to the PLC controllers and other devices connected to the control level ports.
_________________________________________________________________________
Document: Quickstart_IoTGateway_EN
Mitsubishi Electric Europe B.V.
Rev: 001G
Date: 01/02/2022
63
Advertisement
Table of Contents
