Section Six: Interfacing The 957 System; Wiring The Connector Pins - NorthStar 957 Installation Manual

Gps/waas chart navigator
Hide thumbs Also See for 957:
Table of Contents

Advertisement

Wiring the
connector pins
957 INSTALLATION MANUAL, Revision C1
The 957 has the following interface ports:
NMEA 1 and 2 input and output (on the 18-pin NMEA
connector)
7-pin GPS connector
RS-232 input and output (on the 18-pin NMEA connector)
RS-422 / NMEA input and output (on the 6-pin AUX
connector)
Composite video input (on the VIDEO connector)
VGA output (on the VGA connector)
You can display the list of wires for the connectors: Press the
STAR key to display the OPTIONS/SERVICE INFO screen, then
press the PORT SETUP OPTIONS menu key to display the
PORT SETUP OPTIONS screen, then press the WIRING INFO
menu key.
SECTION SIX:
Interfacing the
957 system
Page 39

Advertisement

Table of Contents
loading

This manual is also suitable for:

957 gps - installation rev c1

Table of Contents