Connect Incoming Call; Redial Last Number - Motorola V.3400 User Manual

V.25 bis Autodialer
INVMS Invalid command - message syntax error.
Example: SIC;
Connect Incoming Call CIC
No parameters are required. If there is an incoming call, the modem
immediately answers the call. If no call is incoming, the command is
ignored.
Responses:
VAL Valid command received. Transmitted on receiving an error-
free command with no transmission error such as a parity error. This
confirmation is sent before the command is executed.
INVCU Invalid command - command unknown.
Example: TIC
INVMS Invalid command - message syntax error.
Example: SIC;
Redial Last Number CRR n
The CRR n command redials the last number a maximum of n times. If
no parameters are present, the modem redials once. Also, the maximum
number of redials, the amount of time between redials, and other param-
eters may vary depending on application and national requirements if
outside the U. S.
Responses:
Same as for the CRS command.
Failure response is
{sep}r;{call progress messages}...
where r is the recall count (1
rator field and call progress messages (CFI XX, etc.). If the call fails to
connect, this is repeated for the specified number of times.
11-8
≤ ≤
r n; 1,2...,etc.), followed by a sepa-
V.3400