Dtr State Recognition; Rts/Cts Delay - Motorola V.3400 User Manual

Status Registers
DTR State Recognition S25
The S25 register specifies the amount of time (0-255) in 0.01 second (10
ms) increments that DTR must stay high or low in order to be recog-
nized as such. The default value is 5 (0.05 second).
RTS/CTS Delay S26
The S26 register specifies the amount of time (0-255) in 0.01 second (10
ms) increments between the RTS signal and the CTS signal. The default
value is 0.
Bit Mapped S27
Bit Value
1, 0 00 &M
01 &M1
10 &M2
11 &M3
2 0 &L
1 &L1 and
&L2
3 -- --
5, 4 00 &X
01 &X1
10 &X2
11 --
6 1
0
7 -- --
* default
Lookback Timer S28
The S28 register specifies the amount of time in 1.0 minute increments
that the modem will remain in dial backup mode before retrying leased
line mode. A zero will disable automatic lookback to leased line. The
default value is 15 minutes.
Bit Value
7- 0 0-255
10-12
Command
Async *
Sync data / async dial
Sync data / dial through DTR
Sync data / manual dial
Dial-up line *
Leased line
Reserved
Internal clock *
External clock
Receive clock
Not used
Enable async DTR dialer
Disable async DTR dialer *
Reserved
Command
Time in 1 minute increments (0=disabled)
Description
Description
V.3400