Table of Contents
Advertisement
GENERAL
V.25 bis is an option that allows dialing functions to be controlled using
synchronous data.
Select V.25 bis through the appropriate &M command in the AT
command set (Chapter 5).
If using the LCD:
Scroll through the menu to Main Menu 5,
MODIFY CONFIGURATION.
Advance to and enter the DTE PARAMETERS submenu.
Select SYNC DATA.
Advance to DIAL METHOD.
Select either V.25 BISYNC DIALER or V.25 SDLC DIALER
or V.25 ASYNC DIALER and then select either ASCII or
EBCDIC character format.
Note
The modem must be configured as V.25 SDLC ASCII NRZ
for use with an AS400 IBM computer.
Autodialer Command Strings and Parameters
Most command strings for the autodialer include two parts: the
command itself and the parameter(s) that follow. For the purposes of
this chapter, parameters can be telephone numbers or anything appro-
priate to V.25 bis as described in the following text. Parameters are
separated by semicolons.
For example:
PRN a; nnn . . . n
memory and nnn . . . n = the phone number
V.25 bis Autodialer
where a = the phone number address in
V.3400
Chapter 11
11-1
Advertisement
Table of Contents
