Powerup Option Set; Load Factory Options - Motorola V.3400 User Manual

AT Commands
Powerup Option Set &Y
The &Y command determines which user option set is loaded during
powerup and reset.
Command
&Y
&Y1
&Y?
* default
Load Factory Options &F
The &Fn command loads one of the existing configuration sets,
providing a complete configuration for a compatible system/network
environment. Refer to Appendix E for a complete list of the options in
each set.
Command
&F, &F1
&F2
&F3
&F4
&F5
&F6
&F7
&F8
&F9
* default
5-40
Powerup with user option set 1 *
Powerup with user option set 2
Displays currently selected powerup option set
Load factory option set 1 (async dial-up with V.42 bis) *
Load factory option set 2 (async dial-up without V.42 bis)
Load factory option set 3 (sync dial-up without V.42 bis)
Load factory option set 4 (sync 4-wire leased line without
V.42 bis)
Load factory option set 5 (async 4-wire leased line with
V.42 bis)
Load factory option set 6 (async 4-wire leased line with-
out V.42 bis)
Load factory option set 7 (sync 2-wire leased line normal
originate)
Load factory option set 8 (sync 2-wire leased line forced
answer)
Load factory option set 9 (sync V.25 bis dialer)
Operation
Operation
V.3400