Xon/Xoff Pass Through - Motorola V.3400 User Manual

Command
\Q
\Q1
\Q2
\Q3
\Q4
\Q5
\Q6
\Q7
* default
XON/XOFF Pass Through \X
This option is active when flow control of the modem by the DTE has
been selected for XON/XOFF and the connect mode is MNP-only or
normal. It enables or disables the sending of local flow control charac-
ters (XON/XOFF) to the remote modem as well as being acted on in the
local modem. In MNP-only mode the modem treats incoming XON/
XOFF characters from the remote modem as data characters. In normal
mode the modem will look at the \G command and act accordingly.
Caution
With \X1 in effect local flow control characters will be sent
to the remote system. These characters may turn on the
data flow from the remote system before the modem is ready
to receive more data, possibly resulting in data loss.
Command
\X
\X1
* default
Disable bilateral flow control
Enable bilateral XON/XOFF flow control *
Enable DTE CTS flow control, disable DCE flow control
Enable CTS/RTS bilateral flow control
Disable DCE flow control
Enable DCE XON/XOFF flow control *
Enable DCE RTS flow control
Enable DCE RTS flow control
Process but do not pass XON/XOFF characters to remote
DCE *
Process and pass XON/XOFF characters to remote DCE
Operation
Operation
V.3400
Protocols
6-7