Checking For Updates; Updating Channels - Beko METPOINT CID Operation Manual

METPOINT ® CID

12.3.4.2.5 Checking for updates

Settings -> Device settings -> Update System -> Check USB Stick for new Software updates
If you need to install an older software version, use the "force all" button.

12.3.4.2.6 Updating channels

Settings -> Device settings -> Update System -> Update Channels
If there is an update for the internal channels, you will need to start it separately.
Important:
If the Reboot system button appears after the update, you will need to tap it to restart the METPOINT
40 | 56
If the following messages appear after tapping the Check USB Stick for
new Software updates button, this means that the METPOINT
connected to the USB drive correctly or that there are no files on the USB
drive.
If the METPOINT CID is connected to the USB drive correctly and there
®
are new versions of the individual SW parts, the latter will be indicated
with red text.
To start the update, tap the "Update selections" button.
Update to the METPOINT
Original installation and operation manual
CID channels
®
CID is not
®
CID!
®