Table of Contents
Advertisement
METPOINT
®
CID
4. Intended use
The METPOINT
CID is a leak detection device used to quickly and reliably detect leaks in compressed air systems.
®
The METPOINT
CID leak detection device analyses the ultrasonic waves produced by a leak as a function of distance
®
and pressure.
It is designed exclusively for the intended purpose described here and may only be used accordingly.
The operator must check whether the device is suitable for the use chosen.
The technical data listed on the data sheet are binding. Inappropriate handling and operation outside the technical
specifications is not permitted.
Claims of any kind due to non-intended use are excluded.
5. Technical data
Handheld housing dimensions
Weight
Operating frequency
Power supply, internal
Power supply, external
Operating time
Charging time
Laser
Connections
Colour display
Interface
Data logger
Intended area for use
Operating temperature
Storage temperature
Altitude
Max. air humidity
Permissible pollution degree
Degree of protection
6 | 56
263 x 96 x 280 mm (11.55 x 3.78 x 11.02 in) with preamplifier and horn
0.55 kg (1.21 lb) with preamplifier and horn.
Approx. 3.0 kg (6.61 lb) for the complete kit in its case
40 kHz (+/-2 kHz)
7.2 V Internal lithium-ion battery
12 VDC 1 A External power supply unit (included)
> 9 h (continuous operation)
Max. 4 h
645 – 660 nm wavelength, output power < 1 mW (Class 2 laser)
3.5 mm headphone jack for headphones.
Power supply connector for connecting an external charger.
USB port
Transmissive TFT 3.5" touch panel
USB for importing / exporting data, SW updates, etc.
16 GB memory card (Class 4 microSD)
Indoors
-5 °C ... +50 °C (+23 ... +122 °F)
-20 °C ... +60 °C (-4 ... +140 °F)
Up to 4000 m (13,123 ft) above sea level
< 95% RH, non-condensing
2
IP20
Original installation and operation manual
Advertisement
Table of Contents
