METPOINT
®
CID
12.3.1.4 Fault description
Store -> Fault description text field
28 | 56
In addition to the measuring point company, building and place
information, you can also enter a brief description (maximum of
32 characters).
To do this, tap the "Fault description" text field.
The following fault descriptions will make it much easier to fix the
corresponding leaks later on:
•
Leak.Element
•
Measure
•
Replacement
•
Repair under pressure possible?
•
Leak fixed on-site (Status)
These entries will additionally be stored in an internal database so that
they can be reused at any time.
A number of suggestions come included by default already.
For example, the screenshot on the left shows the options available by
default for the "Leak.Element" field.
Original installation and operation manual