Commissioning / Use; Switching On The Device; Headphone Volume Up / Down - Beko METPOINT CID Operation Manual

Original installation and operation manual

9. Commissioning / use

Please observe the safety instructions in section 1 first
Operating the METPOINT® CID with an external plug-in power supply unit is only permitted in
ambient temperatures ranging from -5 °C (+14 °F) to +40 °C (+104 °F).

9.1 Switching on the device

Press the ON / OFF button and hold it down for about 1 second. The device will switch on and a startup sequence will be
shown on the display. Pressing the button again will switch off the device.
See "Device components and controls" for the ON / OFF button

9.2 Headphone volume up / down

You can raise and lower the headphone volume in 16 steps with the volume up / down buttons. Holding the button
down will automatically raise / lower the value.
See "Device components and controls" for volume up / down buttons
Please make sure that the headphone volume is lower than 50% before putting the headphones
on.
METPOINT CID
®
13 | 56