Original installation and operation manual
METPOINT
CID
®
8.1 Assembly with horn
By bundling sound waves together, the horn makes acoustic amplification possible and helps pinpoint leaks accurately.
Its special design ensures that the integrated laser pointer will continue to be usable. The camera is integrated into the
underside of the horn and is connected electrically to the preamplifier module with the jack.
Assemble the device by joining the individual components until you hear them lightly lock into place (insert them all the
way).
To disassemble the device, remove the components in the opposite order. You will additionally need to press the release
button in order to release the preamplifier module.
8.2 Assembly with focus tube
The focus tube with a tip is used to detect very small leaks and pinpoint them exactly. Just like the horn, the focus tube
can be installed on the preamplifier with an ultrasonic receiver.
The camera cannot be used in this case.
To disassemble the device, remove the components in the opposite order. You will additionally need to press the release
button in order to release the preamplifier module.
11 | 56