Preparing The Device; Changing The Language; Checking The Current Firmware And Updating The Firmware - Beko METPOINT CID Quick Start Manual

METPOINT ® CID

6. Preparing the device

Before starting the leak detection process, you will need to configure the device. To access the
navigation screens, tap the "Home" button.

6.1 Changing the language

6.2 Checking the current firmware and updating the firmware

Please visit the BEKO TECHNOLOGIES homepage on a regular basis to see if a new firmware version
is available. We are continuously making enhancements and improvements to the product, and
keeping the firmware up to date will ensure that you are using the latest software version and have
access to all available functionalities.
1.
2.
3.
4.
5.
8 | 28
Home -> Settings -> Device Settings -> Set Language -> English
Check the firmware version on the homepage and download it from the
following URL: https://www.beko-technologies.com
Check the firmware on the METPOINT
Path: Home -> Settings -> About METPOINT
If the firmware is outdated, download the new version from the
BEKO TECHNOLOGIES homepage
Unzip the ZIP file
Copy the unzipped DEV0004 folder to a USB drive
CID
®
CID -> Software Version
®
Quick Start Guide