Commissioning / Use; Switching On The Device; Headphone Volume Up / Down; Laser On / Off - Beko METPOINT CID Quick Start Manual

METPOINT ® CID

7. Commissioning / use

Please observe the safety instructions in section 1 first

7.1 Switching on the device

Press the ON / OFF button and hold it down for about 1 second. The device will switch on and a
startup sequence will be shown on the display. Pressing the button again will switch off the device.
See section "Device components and controls" for the ON / OFF button.

7.2 Headphone volume up / down

You can raise and lower the headphone volume in 16 steps with the volume up / down buttons.
Holding the button down will automatically raise / lower the value.
See section "Device components and controls" for volume up / down buttons.
Please make sure that the headphone volume is lower than 50% before
putting the headphones on.

7.3 Laser ON / OFF

The laser pointer can only be switched on and off with the laser ON / OFF button on the display (not
with the membrane keypad). When switched on, the display will show a laser warning symbol.
12 | 28
Laser „ON" icon
Quick Start Guide
Please observe all warnings
regarding laser operation! Do
not, under any circumstance,
hit a person's or animal's
eyes directly or indirectly
(reflection) with the laser
beam!